A renovation will leave your house with new floors, new paint, and a good layer of dust in every strand of your carpet.
If you’re looking for carpet cleaning in Burlington after a renovation is complete, you’ll probably be wondering how to get rid of that dust without making it worse. The short answer is simply to wait for the dust to settle, vacuum it up with the right equipment, and then deep clean what the vacuum has missed. This guide will walk you through each step so your carpet is once again looking and feeling great.
What is the fastest way to clean carpet after construction?
Follow this order: let the dust settle for at least 24 hours, vacuum slowly with a HEPA filter vacuum, replace the vacuum filter regularly, and finish with a hot water extraction. Omitting any one of these steps will leave dust behind or, in fact, work to push it deeper into the carpet.
Why is construction dust harder to remove than regular dirt?
Drywall, sawdust, and plaster dust are far finer than normal soil. They settle at the base of the carpet pile and remain suspended in the air for a day or so after work has finished. They also quickly clog the filters of standard vacuums, reducing suction and releasing the fine particles back into the room.
Some of the construction dust will also be an irritant to the lungs and eyes (particularly the dust from sanding or cutting drywall). Clean carpet obviously protects your floors as much as it protects your family’s comfort.
How do you clean carpet after construction dust?
Cleaning carpet after construction dust takes a careful, step-by-step approach, since fine particles settle deep into the fibers and can spread if the wrong method is used.
1. Let the dust settle first.
Wait at least 24 hours after the crew has finished. Open the windows or run the ventilation if you can. Don’t clean too soon, as you’ll just be disturbing the unsettled dust and having it come back into the air and settle on your carpet again.
2. Clear out the large debris by hand.
Pick up the screws, nails, wood chips, and drywall fragments before you vacuum, as sharp items can damage your vacuum and tear the carpet fibres. Wear gloves and use a small magnet tool to locate any loose metal.
3. Vacuum with a HEPA-filter vacuum.
A HEPA filter traps the fine particles that a standard filter would let through. Go slowly and make overlapping passes, vacuuming each area from two or three different directions. Fast passes just skim the surface and leave the dust below.
4. Check and replace the filter regularly.
Construction dust will fill your filters and bags out of all proportion to normal household dirt. Check yours after every room. A full filter will lose all suction, and you’ll be wasting your time cleaning with a tool that’s no longer going to work.
5. Follow up with a hot water extraction.
Vacuuming just removes the top layer. The fine dust at the base of the pile requires hot water extraction (which flushes the dust out of the fibres and carries it away with the water). Always vacuum first. If you wet clean to remove heavy surface dust, it will turn into a paste and be much more difficult to remove.
6. Replace your HVAC filters
Dust will be travelling through your air system as well as across your floors. Fit fresh filters to your furnace and air conditioner when the work is complete. The old filters will simply be recirculating the dust back into the room you’ve just cleaned.
What should you avoid when cleaning construction dust?
These mistakes cost homeowners the most time and effort:
- Cleaning too early. Dust settles for a day or so. Early cleaning just moves it about.
- Use a regular vacuum. Standard filters clog very quickly and just push the fine dust right back out the exhaust.
- Stopping after vacuuming. Surface cleaning leaves the dust embedded at the base of the fibres.
- Use a wet method first. Water and heavy dust make a paste that sticks to the carpet.
- Skip the HVAC filters. Dust comes back through the vents into your carpet.
When should you call a professional carpet cleaner?
You can get away with a light dusting yourself. Call in a professional when the job is going to be anything beyond what a domestic vacuum can cope with. These are the signs that it’s time:
- The carpet is grey, lifeless, or quite stiff even after having been vacuumed.
- Dust clogs your vacuum filter again and again.
- The renovation was to cover a number of rooms, a basement, or indeed an entire floor.
- Paint, adhesive, or plaster has splashed onto the carpet.
- Someone in the house has allergies or asthma.
- The dust smell stays for days after you’ve finished cleaning.
Professional crews bring the commercial extraction equipment, which goes far deeper than any rental machine. They’ll also know what cleaning method is appropriate for your particular carpet so that they’re able to extract the dust without damaging the fibres or leaving the carpet excessively wet. Our checklist on how to prepare your home for professional carpet cleaning makes the visit smoother.
How can you protect your carpet during future renovations?
A little planning before the next project saves you a big cleanup afterward:
- Seal off the work area doorways with plastic sheeting and tape.
- Lay protective carpet film over any carpet that the crew has to walk across.
- Ask the crew to use dust containment when they’re cutting or sanding drywall.
- Keep the doors to nearby rooms closed while you work.
- Cover the vents in the work area to keep the dust out of your air system.
These steps will keep the majority of the dust out of your carpet right from the outset.
Get Your Carpet Ready for Your Renovated Home
Your renovation should be a clean slate, and new carpet is a key part of that. Just let the dust settle, vacuum with a HEPA filter, and then do a proper deep clean to get rid of what’s underneath. If the dust is just too much for you, then Aberdeen Carpet Cleaning is on hand to help. Get in touch today to book your post-renovation carpet cleaning and enjoy your newly renovated space with clean, dust-free floors.
Frequently Asked Questions
How long should you wait to vacuum after construction?
Does construction dust damage carpet?
Not permanently, if you clean it properly. Fine dust left in carpet for a long time can dull the colour and stiffen the fibres. A thorough HEPA vacuum followed by hot water extraction brings most carpets back to a fresh, soft finish.
Can a regular vacuum clean drywall dust?
Does hot water extraction remove construction dust?
How often should you change a vacuum filter after a renovation?
Is construction dust harmful to breathe?
Can you steam clean carpet right after construction?
How do you get paint or plaster splatter out of carpet?
Act quickly on fresh splatter and blot it with a damp cloth. Do not rub, because rubbing spreads the stain and damages the fibres. Dried paint and plaster need professional treatment, so call a carpet cleaner before you try harsh chemicals at home.
